Відео

@@nexcuc1374 I did have some initial issues. The original owner used ethanol fuel so I had to clean the carb and he adjusted the float height way too high causing gas to flood out of the carb. Since I fixed those problems with the help of my cousin I haven't had any issues out of it. Good little outboard.

I sold my Mercury 25 for $4,000 and I bought that one for $6,000. ,000 so overall I spent $2,000 and installed the motor myself and I believe I've added at least that much value to the boat so pretty well

@@Tatoutdoors I will do it 👍

Would you tell where you are fishing?

It was a 2007

Okay thank you that's helpful I have a 2006 Honda Ridgeline haven't decided if I'm going to do a 8 inch or 10 inch yet

@@corycor1083 both are good, if you want lower bass then definitely go with the 10 in

@@johnt4060 thank you!

@@kostashellas3339 Thank you and federals

@@matthewguillot7281 it's called Roy cumbust in the Pascagoula WMA

@@BuckcreekTV thank you I'ma gonna look it up

@@ejsocci2630 thanks!

update: the casting distance on this setup is actually crazyyy, this setup could have you fishing a lake 3 miles from where youre sittin haha

Thank you and glad you liked it and found it useful!

@@gilg2560 i use it on a 10ft bass raider and 7-8mph perfect for my needs

I've never bothered to disassemble mine.I simply use a toothbrush with a little oil to scrub the feed ramp, extractor. Don't buy another gun cause it strips down easier.....just get a toothbrush.

Hey, yes it should be. It won't be very fast but it will get you where you need to go. If the boat is rated for more power it wouldn't hurt to step up to a 5hp

@@BuckcreekTV I ordered a 14-foot PortaBote and they recommend up to 6HP Outboard motor.

@@rmagistr That sounds good, I would personally spring for the 6hp

You will enjoy it

No rust after a year and saltwater use just unscrewed the base a month ago without a problem. They are brass rivets with stainless bolts.

@@BuckcreekTV Awesome. Thank you for the update, planning on doing something similar.

No problem

I did, and it's worked fine for years. It was going to be very very difficult to find a 25 in. shaft so I 20 is sufficient

@BuckcreekTV for sure! You don't find many 25" shafts. Unless you're in the sailboat engine range. You said you made a mistake, so it sounded like you forgot or just didn't do it, which would be silly when you're spending that much money. 😜 I have a 35hp w/ 20" shaft on my 16' deep, and it moves as nice as yours. That 35 to 40 seems to be a good engine size for that size boat.

I appreciate it I'm glad you enjoyed it!

It's post production editing

@@BuckcreekTV ah, alright, thanks

Glad you enjoyed and found it useful!

That sounds awesome! I'm going to have to fix the car again. I bought a brand new one and that didn't do the job. I wonder if there's junk in the fuel system? That's the next step in line for me

15p I don't remember the other dimensions

6-8ft but it can be as short as three or four. Just depends where you're placing them and I just buy 90-120# braided line

In this video 4lb test but for panfish I use 2lb test and have successfully caught bass in that low strength line

Nah you'll be good I've put this boat through way worse than this video

Every once in a while woodies will fly in but it isn't as great as you would think.

Thank you! Glad you enjoyed it!

Glad you found it useful. I certainly will. I appreciate it and glad you enjoyed

I wouldn't use it on the outboard because it is a weak acid. Probably better to use boat soap on that followed by a waxing of it

Not off the top of my head but if I had to guess likely just the carb. I know the 3.5 can be upgraded to 5 horsepower. If you buy a new car for it possibly the same for the 2.5 but that's a guess

@BuckcreekTV yea thats what ive heard but nothing set in stone yet

Thank you!

Glad you enjoyed!! Thank you!

I prefer crickets with the set up but worm can be used as well. If worms are used you can get away with not using a split shot since they sink slowly

I've seen some comments where you can find on the plastic inside the glove box and sometimes they put it in the service manuals if you still have that with the vehicle

Glad you liked it!

Thank you!

Thank you for the help ^_^

It has a dove tail mount on it. You can get a dovetail Mount to picitany rail adapter and then Mount the red dot to that

Glad you enjoyed

Glad you enjoyed and found the information useful!

@@BuckcreekTV do a video on who taught you the skills you are teaching others. God bless

In all honesty this was a lot of trial and error I didn't have anyone teach me how to jug fish